Description
BT / Toyota LHM100UL Ultra-Low, Extra-Long Pallet Jack – 79″ Forks – $750 OBO
Approximately $1,600 New — Our Yard Price: $750 OBO
This is not an ordinary 48-inch pallet jack. This is a factory BT LHM100UL, built by BT Products AB in Sweden — the pallet truck side of Toyota Material Handling — with 2,000 mm / 79-inch extra-long forks and an ultra-low 38 mm (about 1.5 inch) minimum fork height. That combination is the whole point of this machine, and it is what makes it hard to find used.
If you have been searching for a 79 inch pallet jack, a long fork pallet jack, a 2,000 mm fork pallet jack, or a low profile pallet jack that will actually slide under tight-clearance skids, this is that unit. Manual hydraulic operation, 1,000 kg / 2,205 lb capacity, factory support casters fitted for the extra-long fork configuration.
🔩 Specifications — From the Factory Data Plate
- Model: LHM100UL
- Manufacturer: BT Products AB, Sweden (Toyota Material Handling)
- Serial number: 4002895
- Year manufactured: 2015
- Capacity: 1,000 kg / 2,205 lb
- Fork length: 2,000 mm / 78.7 in — 79-inch forks
- Overall fork width: 520 mm / 20.5 in
- Minimum fork height: 38 mm / approximately 1.5 in
- Unit weight: 125 kg / approximately 276 lb
- Operation: manual hydraulic
- Factory support casters used with the extra-long fork configuration
Every figure above is read directly off the factory data plate — photos of the plate available on request.
⚙️ Condition Notes
- Complete and in working condition
- One damaged/missing support caster has been replaced
- Normal used industrial cosmetic wear — scratches, paint wear and some surface rust
- Sold as a used pallet jack; inspection at pickup is welcome
📏 What the 79″ Forks and 1.5″ Entry Height Are Good For
A standard pallet jack tops out around 48 inches of fork and needs real clearance to get under a load. This extra long pallet jack solves both problems at once:
- Long loads that overhang a standard pallet — lumber, pipe, tube, extrusions, sheet goods and long crates
- Low-clearance skids and machine bases where a standard pallet jack simply will not enter
- Custom and shop-fabricated skids that were never built to standard pallet dimensions
- Oversized single loads — support the full length of a load instead of letting it hang off the end of a short fork
- Low-profile equipment and crated machinery sitting close to the floor
If your operation keeps running into loads a normal jack cannot reach or cannot get under, an ultra low pallet jack like this one is the fix.
💰 Pricing
Comparable new LHM100UL units run approximately $1,600. Our Deals From the Yard price is $750 OBO — less than half the approximate cost of buying new, for a complete, working unit.
🤝 Don’t Think It’s Worth Our Asking Price?
Make us an offer. Email info@refurbalers.com with your number, or call 888-440-2671. Reasonable offers get a straight answer — that is what the OBO is there for.
📦 Logistics
- 📍 Located in New Park, PA 17352 (Southern York County)
- Pickup hours flexible — fits easily in a pickup bed or trailer
- 🚜 Forklift loading available on-site
- 📦 Can ship via LTL freight — buyer pays or arranges
📞 Contact
Call: 888-440-2671 for details, more pictures, or to schedule pickup.
Email: info@refurbalers.com
